木工機械木工砂光機博銓

木工機博銓滾筒砂光機DS-26/Drum Sander

現貨-售價 : NT$88,000 未稅不含運

洽詢信箱 : john3687@gmail.com 電話: 0928-351912

配備3HP滾筒馬達
3HP drive for sanding drum.
砂磨寬度為 25"
An economical sander provides 25" sanding width capacity.
每分鐘3-20 FPM的進料變速
Variable feed speed 3-20 FPM.
高品質輸送帶使用壽命長
High quality conveyor belt for long service life.
動態平衡處理使滾筒運轉平順
Dynamically balanced sanding drums ensure smooth running.
雙滾筒配置提供高效率砂磨性能
Two sanding drums configuration provides hugh efficiency sanding performance.
砂帶方便更換
Convenient replacement of sanding belt.
傳送帶方便調整
Conveyor belt tracking is convenient to adjust.
滾筒馬達由電磁開關控制
Magnetic switch controls sanding drum drive.
傳送帶操作由簡易鑰匙開關控制
Key switch controls conveyor belt running.
集塵蓋直徑4"
4" diameter dust hood.

參考影片/Related Video:

影片 1 : https://www.youtube.com/watch?v=zuGGdEg-Uz0

影片 2 : https://www.youtube.com/watch?v=nUTgCxi 3CX0

影片 3 : https://www.youtube.com/watch?v=DD5EaY2PMAE

	1.	滾筒平行度調節 : 通過轉動調節螺絲, 可調節滾筒和輸送台之間的平行狀態, 滾筒前端固定，在後端有個調節螺絲 SANDING DRUM PARALLELISM ADJUSTMENT:The parallelism between the sanding drum and conveyor table is conveniently adjustment by turning the adjustment screws. One of both drums is fixed and the other one is adjustable by adjustment screw.
	2.	可變速進料 : 傳送帶進料是由直流電動馬達驅動，提供每分鐘3-20 FPM的進料變速,適合各類軟，硬木材工件, 位於工作台出料端, 傳送帶操作由簡易鑰匙開關控制, 有效防止未經授權的操作 VARIABLE FEED SPEED:The conveyor belt feed is driven by a dc motor providing variable feed speeds from 6.2-30 FPM to suit all types of soft and hard wood. It is located on the out feed side of the table. The conveyor belt running is controlled by a removable key switch to prevent unauthorized operation.
	3.	滾筒 : 雙滾筒配置, 可一次性完成粗，細兩種砂磨效果, 動態平衡處理使滾筒運轉平順 SANDING DRUMS:The machine is constructed of two sanding drums, allowing for coarse and fine sanding in one feed of the workpiece. The two 5" diameter drums are dynamically balanced for extremely smooth running.
	4.	加工厚度調整 : 輸送台高度由轉動手輪來調整, 設置在機器支架左側的刻度能以英制和公制顯示高度調整值 CONVENIENT THICKNESS ADJUSTMENT:The conveyor table elevation is operated by means of a crank handle. A depth scale in inch and metric graduation is provided on the left side of the machine frame for indicating the thickness adjustment amount.

Drum length/滾筒長度		660mm(26'')
Min. thickness of workpiece/最小加工厚度為		6.35mm (1/4'')
Max. thickness of workpiece/最大加工厚度為		304mm(12'')
Sanding drum speed/滾筒轉速		1600RPM
Conveyor belt speed/輸送帶速度		3-20FPM
Sanding drum diameter/滾筒直徑		127mm (5'')
Sanding drum motor /滾筒馬達		3HP
Conveyor belt motor/輸送帶馬達		1/6HP
Machine dimensions/機器尺寸		46" x 28" x 52"
Packing dimensions/包裝尺寸		39 cuft1-
Net weight /淨重		190kgs
Gross weight/毛重		220kgs
全組裝尺寸		117 x 72 x 146cm

SANDING DRUM PARALLELISM ADJUSTMENT:The parallelism between the sanding drum and conveyor table is conveniently adjustment by turning the adjustment screws. One of both drums is fixed and the other one is adjustable by adjustment screw.

SANDING DRUMS:The machine is constructed of two sanding drums, allowing for coarse and fine sanding in one feed of the workpiece. The two 5" diameter drums are dynamically balanced for extremely smooth running.

CONVENIENT THICKNESS ADJUSTMENT:The conveyor table elevation is operated by means of a crank handle. A depth scale in inch and metric graduation is provided on the left side of the machine frame for indicating the thickness adjustment amount.

SANDING DRUM PARALLELISM ADJUSTMENT:The parallelism between the sanding drum and conveyor table is conveniently adjustment by turning the adjustment screws.
One of both drums is fixed and the other one is adjustable by adjustment screw.

SANDING DRUMS:The machine is constructed of two sanding drums, allowing for coarse and fine sanding in one feed of the workpiece.
The two 5" diameter drums are dynamically balanced for extremely smooth running.

CONVENIENT THICKNESS ADJUSTMENT:The conveyor table elevation is operated by means of a crank handle.
A depth scale in inch and metric graduation is provided on the left side of the machine frame for indicating the thickness adjustment amount.